DATA LOGGING DESCRIPTION
MAN-1111 Rev H
©Copyright 2015 LSI-Robway Pty Ltd
Page 123
Detailed Instructions to Download Data Log using SD Card.
The RCI-4100 Control Unit has an on-board SD card to which data from the internal data logger can be
downloaded and saved for reading on a PC.
First, the internal logger records all data within the set parameters of the logger and system. The data is then
stored in the on-board flash memory chip.
Calibration Mode Function Codes are used for downloading the logger contents from the on-board memory
into the SD card. The SD card can then be removed from the Control Unit and inserted into the card reader
on a PC for viewing, saving and printing the recorded data.
As the logger contents can only be downloaded in Calibration Mode, only authorised personnel with access
to the over-ride key and Calibration Mode can perform this function.
Procedure is as follows:
•
Turn RCI-4100 power off.
•
Open the controller and place an SD card into the SD card holder on the RCI-4100 controller unit
board (see figure below)
•
Turn the over-ride key switch ON and access Calibration Mode.
•
Go to the “Download Data Log” function code and press the ENTER key.
•
The default setting on the screen is “RS232”. Use the up/down arrow keys to select “SD CARD”.
•
While “SDCARD” is shown on the screen press the ENTER key and this will download the logger
contents into the SD card. This may take a few minutes depending on the amount of data being
transferred. While downloading 3 dots are shown under F-xx number. When download is completed
the message ‘DONE’ will appear.
•
Switch RCI-4100 power off.
•
Carefully remove the SD card and insert it into a card reader on a PC for viewing the logger contents.
Downloaded data is in the *.LOG file.
•
RCI-4100 power can be re-applied now.
•
Open the *. LOG file using any word processing program such as MS Word or Notepad for viewing,
saving and/or printing of data. This file can also be imported into MS Excel for easier viewing.
•
Once saved the *.LOG file can be cleared/deleted from the SD card.
Viewing a DataLog using MS Excel
For easier viewing of the log, it can be imported into a MS Excel spreadsheet. Contact LSI-Robway for
further details.
Datalog Error Codes
The following page lists the error codes and an explanation on how to interpret them.
Summary of Contents for RCI-4100
