OPERATION AND INSTALLATION
RCI-4100 SYSTEM
MAN-1111 Rev H
©Copyright 2015 LSI-Robway Pty Ltd
Page 9
Important Safety Notices
Notes, Cautions and Warnings are presented to aid in understanding and operating the equipment or
to protect personnel and equipment. At all times relevant codes applicable to location of service must
be adhered too.
A “Note” is an advisory or illustrative statement and does not contain any mandatory statements.
A “Caution” is used where non-compliance with text may result in damage to equipment.
A “Warning” is used where non-compliance with text may result in injury to, or death of, personnel.
NOTE
: This Rated Capacity Indicator is fitted to assist the crane operator. This Rated
Capacity Indicator is not a substitute for operator judgement, experience or safe crane
operation. At all times the driver is ultimately responsible for safe crane operation.
The operator should, prior to operation of the crane, read this manual carefully and
thoroughly and shall ensure that all operational instructions and warnings are
understood and complied with.
Proper system operation requires the operator to select the proper crane setup and
working configuration
WARNING: THE RCI-4100IS SYSTEM IS INTENDED FOR USE IN A GROUP IIB ZONE 1
EXPLOSIVE GAS ATMOSPHERE.
WARNING: THE RCI-4100 SYSTEM IS A CRANE DEVICE WHICH WARNS THE
OPERATOR OF IMPENDING OVERLOAD CONDITIONS AND OVER-HOIST
CONDITIONS WHICH COULD CAUSE DAMAGE TO PROPERTY, CRANE
AND PERSONNEL.
PROVIDED WARNINGS ARE NOT EXCLUSIVE, AS LSI-ROBWAY COULD
NOT POSSIBLY KNOW, EVALUATE AND ADVISE SERVICE PEOPLE OF
ALL CONCEIVABLE WAYS IN WHICH SERVICE MIGHT BE PERFORMED OR
ALL POSSIBLE ASSOCIATED HAZARDOUS CONSEQUENCES.
ACCORDINGLY, ANYONE WHO USES SERVICE PROCEDURES OR TOOLS
WHICH ARE NOT RECOMMENDED BY LSI-ROBWAY MUST FIRST SATISFY
THEMSELVES TO THEIR SUITABILITY AND THAT EITHER PERSONNEL
SAFETY OR EQUIPMENT SAFETY WILL BE JEOPARDISED BY THE
SELECTED METHOD.
CAUTION
:
SAFE, RELIABLE OPERATION OF LSI-ROBWAY SYSTEMS REQUIRES THE
SYSTEMS TO BE MAINTAINED IN A PROPER MANNER AND SERVICED BY
TECHNICALLY TRAINED PERSONNEL USING TRADE (OR PROFESSION)
RECOGNISED SERVICE PROCEDURES AND CORRECT TOOLS FOR THE
PURPOSE.
Summary of Contents for RCI-4100
