Set Time
Max. and min. levels
pulsating air massage
1
2
3
4
6
7
Max. and min. levels
pulsating water massage
activación
Blowing to empty air
cir
cuit water
5
Tutorial mode
7
10
+
2"
It returns to main screen if you do not press any key during ten seconds or press the key
during two seconds.
❚
Tutorial mode
It is the demo mode which sequentially activates all functions of the bathtub.
You can interrupt the tutorial mode in any time by pressing this key
during two seconds.
Problem
Possible cause
What to do
The screen does not light.
Failure in electricity supply.
Magnetothermal switch has cut
out.
Check mains supply voltage.
Set them to circuit closed position (ON). If they cut out again, contact the
Roca Technical Service.
None of the functions switches
on.
Insufficient water in the bathtub.
Fill the bathtub.
If the detected anomaly is not resolved with this information, please contact the Roca Technical Service.
Troubleshooting
Configuration
(Only TOTAL
massage models)
(Bathtub must be empty)
(Only TOTAL massage models)
