4
5
Congratulations on your choice and thank you for purchasing the
Georgia panelled bathtub by Roca.
This manual is a basic guide for correct installation. Besides this
manual, you should also consult the Georgia bathtub User and
Installation Manuals for complete installation.
1. DESCRIPTION OF MATERIAL
Once you have unpackaged the panel, check that you have received
the following material for each panel:
- 2 chrome joint sections
- Bag of nuts and bolts containing:
2 screws
2 washers
2 cap nuts
1 bit
- Panel
- 2 assembled central support units (fig. 1)
- 2 assembled end support units (fig. 2)
- Bag of nuts and bolts containing:
4 M10 nuts
6 serrated washers
4 upper rod supports
4 support plates
2 stops with nut
2. BATHTUB PREPARATION
Check that all the perimeter of the bathtub is level and set at a
height of 535 mm from the floor to the lower edge of the tub rim.
(Figure 3)
If necessary, adjust the tub using the six legs. The tub rests on the
floor by means of the legs of two transverse levelling crosspieces
and one central crosspiece.
