Cleaning and maintenance
64
When the battery indicator on the remote control unit fl ashes
The battery indicator fl ashes when the battery is about to expire. (
☞
See page 45.)
Replace the batteries with new ones as described in the following procedure.
[Note]
●
Install the batteries with the positive and
negative poles facing the correct direction as
shown on the remote control unit case.
●
Do not use new and old batteries together.
●
Use alkaline batteries only.
Lift up the remote control unit
and remove it from its bracket.
Remove the back cover and replace the
batteries with new ones (two 1.5-V AA
alkaline batteries).
Attach the back cover, and slide the
remote control unit into its bracket from
the top.
Press the Hr and Min buttons to adjust
the time.
(
☞
See page 16.)
[Reference]
●
The batteries were used for operation checks while the remote control unit was installed, so their service life
may be shorter than commercially available batteries.
●
Depending on the size of the room, fi nishing and color (particularly a dark color) of the wall, etc., the remote
control unit may stop functioning before the battery indicator starts fl ashing.
Replacing the remote control unit batteries
Battery indicator
Bracket
Remote control unit
Back cover
<Main operation panel on the remote control>
Alkaline batteries
E-Bidet.ru -
официальный
дилер
Roca Lumen Avant
в
РФ
(http://e-bidet.ru)
E-Bidet.ru -
официальный
дилер
Roca Lumen Avant
в
РФ
(http://e-bidet.ru)