17
Trial operation
Check the shower and bidet spray.
* Since there is an occupied seat sensor, the
shower toilet's shower, bidet and deodorizing
functions will not operate if you don't touch the
seat.
Roll up your sleeve
and bring your bare
arm in direct contact
with the toilet seat.
1. Check the shower washing operation.
(1) Rest your arm on the toilet seat, then press the
POWERFUL shower button.
It takes 1 to 2 minutes for the tank to fill and for
water to come out from the shower nozzle. (It will
come out sooner if the spray strength is set at the
maximum setting.)
The shower will stop automatically 2 minutes after
the shower button is pressed. If the nozzle does not
extend, press the button again.
(2) When the nozzle extends, cover the tip with the
palm of your hand to catch the spray.
(3) Press the stop button to stop the shower spray.
2. Perform the same check with the
bidet spray function.
* There is no deodorizing button. Deodorizing starts when a person stands in front of the toilet.
AUTO FLUSH
Flushes the toilet
automatically when you rise
from the toilet seat.
POWER SAVE
Saves power by lowering
the toilet seat and water
temperature.
PLASMACLUSTER ION
Outputs ions that make
the room comfortable.
POWER ON/OFF
Turns the shower
toilet's power on/off.
WATER TEMP.
Adjusts the temperature
of the shower and bidet
water.
Open the lid.
LIGHT
Lights up the floor and
the inside of the toilet
bowl.
NOZZLE CLEANING
Water to clean the nozzles comes
out from near the position of the
nozzles.
AUTO SEAT OPEN
If a user stands in front of the
toilet, this function opens the
toilet seat cover automatically.
SEAT TEMP.
Adjusts the heated toilet
seat temperature.
WIDE RANGE
Moves the nozzle
forward or backward,
washing a wider range.
NOZZLE POSITION
Shifts the position of the
nozzle during shower
spray and bidet spray.
