8
Installation
1. Installing the water shutoff valve
CAUTION:
Do not get your hand caught in the water shutoff
valve or step on it.
* It could cause the pipe to become unstable or damage
it, causing water leakage.
* There is danger of marring the wall or the floor.
Install the water supply outlet in the proper
direction so that the water shutoff valve won’t cause
bending of the water supply hose.
After finishing the walls and floor, install the water
supply pipe and water shutoff valve.
* When installing the water shutoff valve on the water
supply pipe, wind some sealing material around the
threads, such as seal tape.
* Tighten the water shutoff valve fully using tools.
2. Installing the drain socket
(1) Cut the drain pipe in parallel with the floor.
CAUTION:
Cut off the drain pipe so that the cut surface is
parallel with the floor.
* If the cutting position is not accurate, it could cause
water leakage and generate bad odors.
(2) Drill pilot holes (S10) for the drain socket, and strike
the locally procured plastic anchors (S10).
(3) Clean the contacting part of the drain pipe and that
of the drain socket. Apply silicone on the contacting
part (see the figure) to seal the clearance between
the drain pipe and the drain socket.
CAUTION:
Be certain to seal the drain pipe and the drain
socket.
* If the sealing is not accurate, it could cause water
leakage and generate bad odors.
Do not cut the orifice of the drain socket.
* If the orifice is cut, it will be impossible to flush the
toilet.
In the case of water supply
from the wall
In the case of
water supply
from the floor
Seal Tape
Water
Supply
Pipe
Water Shutoff
Valve
Water Supply Pipe
Seal Tape
Water Shutoff Valve
Water Supply
Outlet
Water
Supply
Outlet
Silicone
Sealing for Drain Socket
Drain
Socket
Drain Pipe
ø110
to 114
Silicone
40 mm
Sealing for Contacting Part
FL
