5
Rotation of the jets allows the increase or decrease the
water massage intensity.
2. MAIN FUNCTIONS ACCESSIBLE FROM
THE ELECTRONIC CONTROL PANEL
FILTER
LIGHT
JETS 2
JETS 3
JETS 1
DOWN
UP
AIR/AUX
CLOCK
ECONO
2
1
3
2.1. Switching on/off the pump
JETS 1
1
The hydromassage pump can be switched on/off directly
from the electronic control panel. After starting the pump,
this icon
1
, appears on the display and after switching
it off, the icon disappears.
With the two-gear pump, pressing the button for the
fi
rst
time switches the pump over to a low gear (
fi
ltration; this
icon
1
blinks on the display). Pressing the button once
again switches the pump over to a top gear (massage;
this icon
1
appears on the display). Pressing the same
button again switches the pump off and the icon disappe-
ars from the display.
In some cases, the pump automatically switches over to
a low gear after connecting it to the power supply. This
happens during the
fi
ltration or the water heating process
in the SPA bath.
The pump working in massage mode have automatic
time out (20 minutes) from the last button start.
JETS 2
2
JETS 3
3
- unavailable
2.2. Extra equipment
AIR
airmassage (on/off)
2.3. Switching on/off the lighting
LIGHT
Press this button to switch on the lighting. This icon
appears on the display. Press the same button again to
switch off the lighting, and the icon disappears from the
display. The lighting switches off automatically after 2 ho-
urs from the last pressing of the lighting on/off button.
Press and hold this button
LIGHT
for more than 5 seconds
to view from inside the spa the water temperature and
time display projection, to read these data.
2.4. Setting the right time
CLOCK
The controller is
fi
tted with the RTC system (real-time
clock), which works permanently even after disconnec-
ting the main power. The RTC system makes it easier
to use the SPA, since the controller memorize the clock,
fi
ltration and the economy mode setting even after the
main power is off. It is not necessary to set the
fi
ltration
start time and its duration again. RTC settings are availa-
ble from big panel only.
To change the RTC system setting:
●
Press and hold the clock button for about 5 seconds
until the clock icon
starts blinking and appears per-
manently on the display.
●
Set the hour by using the up/down arrow buttons
UP
DOWN
●
Press the clock button once again to set minutes by
using the up/down arrow buttons
UP
DOWN
●
Press the clock button once again to save the current
setting after the time modi
fi
cation. If no button is pressed
for longer than 5 seconds, the controller returns to its
normal mode without saving the setting.
2.5. Economy mode
ECONO
After switching on the economy mode (energy saving
mode), the controller keeps the temperature 10°C (50°F)
lower than that previously set.
When this mode is working, this icon appears on the
display. The economy mode can be activated (the icon is
displayed permanently) or suspended for 40 minutes from
the moment of switching off the last pump, when at least
one pump is switched on during this mode. Regardless of
the temperature previously set, the controller maintains
the water temperature not lower than 15°C (59°F).
To enter the economy mode:
●
Press this button
ECONO
●
The display will then show „Edx”, where x stands for
the economy mode duration (from 1 to 24 hours)
Ed0 – the economy mode is switched off,
Ed24 – the economy mode is working continuously.
Summary of Contents for SPA BROADWAY ROUND
Page 1: ...1 User s Handbook SPA BROADWAY ROUND...
Page 11: ...11...
