34
Using the meter as a diary
5
The meter calculates the average for a period even when the saved test results cover a shorter period.
For example: You only performed tests in the last 5 days. In this case, the test results of the last 5 days
are used to calculate the averages for all four periods (7, 14, 30 and 90 days).
If you changed the date or time, performed a test and then re‑set the date or time, the chronological
order of the test results is interrupted. As the meter can only calculate averages based on test results in
an uninterrupted chronological order, it therefore does not take into account test results prior to the
interruption.
You can switch from displaying any average to testing by sliding a test strip into the meter.
Back
To go back to the saved test
results:
Press the M button until a saved
test result appears on the
display.
Turn off
To turn the meter off:
Press the M button and S button
at the same time.
No average
If there are no test results saved
for the selected average, three
dashes are displayed.
man_06658768001_02_EN.indb 34
14.08.2013 10:19:28
