1
Next Gen Step Slider
Made in the USA
BD
-
SS
-
200
-
JK4
TOOLS REQUIRED FOR INSTALL
Congratulations on your purchase of the Next Gen Step Slider!
Designed to be function, tough, and durable.
These steps are rated for trails 5 and below.*
*If you plan on running higher rather trails, our optional Skid Plate are recommended
.
AX
-
SS
-
SP
-
JK4
IMPORTANT NOTES
-
•
No maintenance required. If the steps become jammed with mud/dirt, simply spray them off and let them
dry. Harness is waterproof and the motors are water resistant.
•
Drilling is required for install of nutserts.
•
18 mm Socket and Wrench
•
19 mm Socket and Wrench
•
3/16” Hex Key / Allen Wrench
•
3/4” Step Drill
•
1/8” drill bits for pilot hole
•
Nutsert tool with 5/16”
-
18 Mandrel
•
**We recommend a Marson 325 or
Four Wheel Parts Nutsert Tool Set
-
2834**
BD
-
SS
-
201
-
JK4
