17
RF-SH430
Decrease the volume. With the headset on or during a call,
press the Vol– button repeatedly.
Every press you hear a beep with a
lower volume and lower tone
Enter pairing mode.
With the headset off, press and hold
the multi-function button for five
seconds. See the pairing instructions
of your mobile phone.
Headset indicator flashes green twice
every second and you will hear a series
of high tones.
Accept a call.
During the incoming call, press the
multi-function button once.
Headset picks up the call.
Reject a call. (Only
available with mobile
phones supporting
hands-free mode 2)
During the incoming call, press and
hold the multi-function button for one
second.
Headset rejects the call.
Voice dial. (Only
available with mobile
phones supporting
voice dialing)
With the headset on, press the
multi-function button once.
Headset makes a series of short beeps
while mobile initiates the voice dialing
command.
End a call.
During a call, press the multi-function
button once.
Headset hangs up the current call.
Save a favorite
number.
Press the Vol– and Vol+ buttons for
three seconds.
Last incoming call number is stored as
favorite.
Call a favorite number Press the multi-function button for
one second.
Calls the favorite number.
Activate automatic call
pick up.
With the headset on, press the
multi-function button and the Vol–
button for one second.
Selects the automatic call pick up
mode. You can deactivate automatic
call pick up in the same way.
Check the battery
level.
With the headset on, press the
multi-function button four times.
The number of tones (1, 2, 3, or 4)
approximately indicates the remaining
talk time in hours (>1, 2, 3, or 4).
How to...
Action
Headset response
Summary of Contents for RF-SH430
