6
Need help? Call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)
RF-TVMP20 TV Wall Mount
STEP 2 -
Determining your mounting configuration
1
Carefully place your TV screen face down on a cushioned, clean surface to protect the screen from damage
and scratches.
2
If your TV has a table top stand attached, remove the stand. See the documentation that came with your TV
for instructions.
3
Temporarily hold the flat surface of the arm assembly (
B
) against the back of your TV.
4
Identify the type of mounting configuration by determining if your arm assembly (
B
) lines up with the screw
holes on the back of your TV or if you will need to install the adapters (
C
).
5
Remove the arm assembly.
For 75 x 75mm or 100 x 100 mm mounting configurations, go to "STEP 3: Option 1- Attaching the arm assembly
without the adapters" on page 7.
-OR-
For a 100 x 200 mm, 200 x 200 mm, or 200 x 100 mm configuration, go to "STEP 3: Option 2 - Attaching the
adapters to the arm assembly" on page 8.
200mm (7-7/8”)
20
0mm (7-7/
8”)
10
0mm (3-15
/1
6”)
200mm (7-7/8”)
100mm (3-15/16”)
75mm (2-15
/1
6”
)
10
0mm (3-15
/1
6”)
75mm (2-15/16”)
100mm (3-15/16”)
20
0mm (7-7/
8”)
75 x 75mm
100 x 100 mm
100 x 200 mm
200 x 200 mm
200 x 100 mm
RF-TVMP20_13-0707_MAN_V2_ENG.fm Page 6 Wednesday, July 10, 2013 6:23 AM
