Wiring the Crossovers
The LP-1 and LP-2 are designed to be wired in series with the
subwoofers being used. Both positive (+) and negative (-)
thruput connectors are provided. For more information, refer
to the diagrams beginning on page 8.
Working with 2
Ω
and 4
Ω
woofer loads and crossover fre-
quencies of 100Hz will set the inductor values for the LP-1
and LP-2 at 3.5 mH and 6.6 mH respectively.
To place the crossover in “mono mode,”
1. Place a jumper between the left to right positive outputs.
2. Place another jumper between the left to right negative
outputs.
– 6 –
Summary of Contents for AudioPhile 2X-4
Page 1: ...AUDIOphile LP 1 LP 2 Low Pass Crossovers 2x 4 2 Way Crossover Owner s Manual...
Page 12: ...9 L R Input Jumpers Output To Woofers Input from Amp LP 1 LP 1 Mono Mode...
Page 13: ...10 LP 2 Stereo Mode 2 x 6 6 mH coils L R Input Input from amp Output To Woofers LP 2...
Page 14: ...11 L R Input Jumpers Output To Woofers Input from Amp LP 2 Mono Mode LP 2...