3
NOTE:
Vb is the gross volume, which is the TOTAL internal volume, before any speaker and/or port displacement.
All external dimensions were based on the use of 3/4" (1.90cm) materials.
NOTE:
When using enclosures other than recommended, call Technical Support for correct application.
NOTE:
Vb is the gross volume, which is the TOTAL internal volume, before any speaker and/or port displacement.
All external dimensions were based on the use of 3/4" (1.90cm) materials.
NOTE:
When using enclosures other than recommended, call Technical Support for correct application.
S
EALED
E
NCLOSURES
V
ENTED
E
NCLOSURES
Specifications subject to change without notice
Optimum Sealed Enclosure Recommendation
Recommended Sealed Enclosure Volume Range
SEALED ENCLOSURES
10"
12"
R2D2-10 / R2D4-10
R2D2-12 / R2D4-12
Vb- Internal Area cu. ft.
0.59
1.02
(Liter)
(16.7)
(28.9)
F3- -3dB Point (Hz)
57.5
51.4
Qtc- Enclosure Damping
0.75
0.94
H - Height-inch
15.75
17.5
(cm)
(40.01)
(44.45)
W - Width-inch
17.5
18.5
(cm)
(44.45)
(46.99)
D - Depth-inch
6.25
8.25
(cm)
(15.88)
(20.96)
SEALED ENCLOSURES
10"
12"
R2D2-10 / R2D4-10
R2D2-12 / R2D4-12
Vb- Volume Range cu. ft.
0.50 to 0.75
0.75 to 1.25
(Liter)
(14.16 to 21.24)
(21.24 to 35.40)
Specifications subject to change without notice
Number of ports noted in ( )
Optimum Vented (Ported) Enclosure Sizes
VENTED ENCLOSURES
10"
12"
R2D2-10 / R2D4-10
R2D2-12 / R2D4-12
Vb- Internal Area cu. ft.
1.40
1.79
(Liter)
(39.6)
(50.7)
Fb- Tuning Frequency (Hz)
43.0
45.0
F3- -3dB Point (Hz)
37.1
39.4
H - Height-inch
14.0
16.5
(cm)
(35.56)
(41.91)
W - Width-inch
17.0
20.5
(cm)
(43.18)
(52.07)
D - Depth-inch
15.25
13.0
(cm)
(38.74)
(33.02)
P - Port Diameter and
Length-inch
(1) 4 x 13
(1) 4 x 9.3
(cm)
(1) (10.16 x 33.30)
(1) (10.16 x 23.70)
NOTE:
The port shown can be placed on any face of the enclosure as long as the port ends are not obstructed.
NOTE:
When using vented enclosures, for maximum reliability and power handling ensure that a subsonic or "infrasonic" filter is used so that
only usable low frequency signal is sent to the subwoofer.
