background image

Dear Customer,

Congratulations on your purchase of America’s finest brand of car audio compo-
nents.  At Rockford Fosgate we are committed to musical reproduction at its best,
and we are pleased you chose our product.  Through years of engineering expertise,
hand craftsmanship and critical testing procedures we have created a wide range
of products that reproduce music with all the clarity and richness you deserve.

For maximum performance we recommend you have your new Rockford Fosgate
product installed by an Authorized Rockford Fosgate Dealer,  as we  provide
specialized training through Rockford Technical Training Institute (RTTI).   Please
read your warranty and retain your receipt and original carton for possible future
use.

To add the finishing touch to your new Rockford Fosgate image order your Rockford
accessories, which include everything from T-shirts and jackets to hats and
sunglasses.

To get a free brochure on Rockford Fosgate products and Rockford accessories,
please call 1-800-669-9899 or FAX 1-602-966-3983 in the U.S. For Canada, call
Korbon Trading at 905-567-1920. For international orders FAX 001-1-602-967-
8132 or call 001-1-602-967-3565.

If, after reading your manual, you still have questions regarding this prod-
uct, we recommend that you see your Rockford Fosgate dealer. If you need
futher assistance, you can call us direct at 1-800-795-2385. Be sure to have
your serial number, model number and date of purchase available when
you call.

The serial number can be found on the outside of the box.  Please be sure
to record it in the space provided below as your permanent record.  This will
serve as verification of your factory warranty and could become useful in
recovering your product if ever stolen.

Serial Number: _________________________________________

Model Number: ___________________________________

PRACTICE SAFE SOUND™

CONTINUOUS EXPOSURE TO SOUND PRESSURE LEVELS
OVER 100dB MAY CAUSE PERMANENT HEARING LOSS. HIGH
POWERED AUTO SOUND SYSTEMS MAY PRODUCE SOUND
PRESSURE LEVELS WELL OVER 130dB. USE COMMON SENSE
AND PRACTICE SAFE SOUND.

Summary of Contents for Punch PCH-14X

































Reviews: