background image

E3

E14

SPECIFICATION

TUNER(FM)

.....................................................87.5-107.9 MHz

Channel Step..........................................................  200KHz 

Sensitivity     ............................................................8dB

Stereo Separation....................................................30dB

Signal to Noise Radio................................................60dB

Frequency Range

TUNER(AM)

....................................................530-1710 KHz

Usable Sensitivity....................................................32 dBuV

Channel Step..........................................................10KHz

Signal to Noise Radio...............................................50dB 

Frequency Range

LINE-OUT

Impedance

...........................................................33 Ohm

Output

..................................................................3 Volt ( max )

GENERAL

..........................................................13.8V DC (10-15.6V allowable)

Speaker Impedance................................................. 4 or 8 ohm

Output Power........................................................... 50W x 4CH

Fuse........................................................................10A

Power Supply

Note: Specifications and the design are subject to possible modification

           without notice due to improvement.

Summary of Contents for RFX4000










Reviews: