E13
E4
If the fuse blows, check the power connection and replace the fuse. If the fuse
blows again after the replacement, there may be an internal malfunction. In this
case, consult your nearest repairing center.
Fuse replacement
Warning:
Only replace fuse with the same type and rating. Use of a different
type or rating may cause serious damage.
Be sure your wire remote(RFX-MR3/RFX-MR6) is installed correctly,
wrong connection will cause serious damage to the wire remote.
!
WIRE DIAGRAM
S
D
B
L
U
E
T
O
O
T
H D
O
N
G
L
E
D
IG
I P
O
R
T
BLUETOOTH OPERATION
MODEL: RFX4000BT
Installation Note for Bluetooth Dongle
To get better signal, the Bluetooth Dongle needs to be installed near the surface and
must avoid a metal surface.
If the Dongle is installed under a metal surface or deep inside, it may hare a poor
Bluetooth signal.
Bluetooth mode select
Press the MODE(4) button and select the Bluetooth mode .
Make sure the Bluetooth Dongle is connected to the appropriate port on the unit.
Pairing with a Bluetooth device
The unit is ready to pair when the BT mode is selected.To pair your device to the
unit,make sure you are close enough to the unit.
1. Open the Bluetooth setting on your device,
2. Choose "RFX4000" from the list of the available Bluetooth link,
3. Enter "0000" as the Bluetooth passwork.
Play the Bluetooth music
When you succeed in pairing the Bluetooth device,you can play the Bluetotth music
on your device.
a. Press the previous/next key to change the track.
b. Press the play/pause key to start or pause the audio.
c. Press and hold A/PS key to disconnect the current Bluetooth device from the unit,
but this will not erase the pairing from unit memory.
d. Press and hold BAND key s to erase all Bluetooth pairings stored in the uint
memory. .
(BLUETOOTH DONGLE)
