4
Remove the (2) bolts from the inside of the vehicle on both the passenger
and driver’s side.
Remove the (2) spring nuts from the panels once the bolts are out of the
way using a pick tool or small flat blade screwdriver.
Installation
Applicable Models:
2016 & Up YXZ1000R/YXZ1000R SS
These front speaker enclosures are designed to work with Rockford
Fosgate’s RFYXZ-K8 amplifier kit and RFYXZ-PMXDK dash kit.
NOTE: Some additional interior pieces were removed to make photography
easier for documenting the installation process. The installation process is
the same for both the passenger and driver’s side of the vehicle.
Step 1 - Remove Hood
Using a 4mm allen wrench, loosen the screws holding the hood in place
and remove the hood from the vehicle.
Step 2 - Remove Inner Fender Wells
Remove the inner fender wells using a 10mm socket. There are (7) bolts
on passenger side and (4) on driver’s side securing them to the vehicle.