5
Installation
Step 3 - Prepare Speaker Enclosures and Mounting Area
Temporarily install the speaker pod into the foot well area to mark the holes
that will need to be drilled
Using the (2) bolts removed from the inside of the vehicle, secure the pod
in place from the wheel well side.
Using a marker, mark the location of the (2) holes on the top of the speaker
pod for drilling.
Remove the pod and drill (2) holes in the firewall using a 5/16” and 1/2”
drill bit.
Next prep the speaker pods by drilling the holes in pods. The pods come
with the mounting hole locations already marked. Use 1/8” bit to clean out
the holes to prevent damaging the screws or enclosures.
Step 4 - Mount Speaker Enclosures
Remount the pod into the foot well location.