7
Load the speaker into the enclosure and secure using the hardware
supplied with the speaker.
NOTE: After the speaker is secured repeat the installation process for the
opposite speaker pod on the other side.
Once both speaker pods are installed and the harnesses are ran, locate the
front speaker output connections in the RFYXZ-DK radio harness or the
RFYXZ-K8 harness and remove the watertight plugs.
Connect the speaker harnesses to the output plugs paying attention to the
left and right speaker labels.
Once the connections are made, test the system to verify functionality.
After testing, secure the wire harnesses with plastic wire ties and reassemble
the vehicle.
Installation
