I
NSTALLING
THE
O
PTIONAL
SYM-E28 DC
ARD
A. Disconnect RDAT & Power from the EPX
2.
B. Remove Cover from main unit by unscrewing the six hex head screws with the 3/32" Allen wrench supplied with the EPX
2
.
C. Remove 2 Jumpers on connector P5 corresponding to LOL, LRL, LOR & LRR.
D. Remove 2 Nylon Screws carefully from standoffs with a slotted screwdriver.
E. Install 3 Header Extensions supplied with EQ carefully into P3, P4 and P5.
F. Install E28 carefully into header extensions P3, P4 and P5.
G. Replace 2 Nylon Screws carefully through EQ and secure into standoffs with a slotted screwdriver. (
Do Not Overtighten.)
H. Replace Cover on the main unit with the six hex head screws.
I. Reconnect RDAT & Power to main unit.
J. Adapt E28 Software by selecting DCard from the Setup menu and select E28 or refer to page 36 of your EPX
2
Manual.
K. Congratulations! You have successfully installed your optional Equalizer Module.
ATTENTION: To maintain your EPX
2
warranty, we recommend your Authorized Rockford Fosgate Dealer install your new accessory.
®
®
®
®
P4
P5
P3
B
B
B
B
A
B
D
C
D
™
P4
P5
P3
G
F
G
Header
Extension
Header
Extension
Header
Extension
E
E
E
F
F
