Adjusting the Center Crossover
This section describes the procedures for adjusting the Center
Crossover Response curve.
1.
Press the blue Right arrow key to display the second page of
the XOVER Menu.
* CROSSOVER MENU *
CENTER
2.
Select
CENTER
from the XOVER Menu. The CENTER
CROSSOVER’s RESPONSE screen is displayed.
dB = 0.0
F3 = 201
20 200
2k 20k
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . .
3. To adjust the high-side cutoff frequency (F3)
press the
function key on the extreme right
.
To adjust the low-side
cutoff frequency
press
the function
key on the extreme left.
4 . To increase the cutoff frequency (F3) press the
blue
Right
arrow key. To decrease, press the
blue
Left arrow key.
Notice how the graph changes as you adjust the cutoff
frequency, here indicating the lowpass cutoff frequency at
201 Hz.
Use the
blue
Up and Down arrow keys to adjust the selected
output’s level over a ±12 dB range. To return this setting to
unity gain (0.0 dB) press the
blue
Zero Set Key.
5.
When finished press the ESC key twice to return to the Main
Menu.
Note:
To LOCK the Frequency Response settings from unautho-
rized individuals, see the “Basic SYMMETRY Operator’s
Manual. ”
-12-