Distributed by Rockler Companies, Inc.
Medina, MN 55340
36833
Rev 10/17
Check Rockler.com for updates. If you have further questions, please
contact our Technical Support Department at 1-800-260-9663
or support@rockler.com
4
When moving the fence, release
the lever slowly and stop just as you feel the cam
disengage. This will prevent the fence from kicking to
the left when you lock in your new setting.
4. Place your stock against the fence and adjust the fence
until the stock just touches the bearing guide. Lock
down the rip fence.
Fig. 3.
Fig. 4 - Safety equipment removed for clarity
Fig. 3 - Adjusting fence only
When making cuts, always use a push
block or push stick to help keep your hands away
from the blade.
5. Make the rip cut. Fig. 4.
6. Repeat steps 4 and 5 as needed to cut matching
thin strips.
