Page 5 of 16
Four Power Sequence Modes of Operation
Standard Mode
- Simple dial in the time delay desired for the on delay sequence and the
off delay sequence from 1-15 seconds on the two rotary digital switches. Power on and off
delay sequence is engaged by using push button switch.
Remember to always keep delays settings differant to avoid timer mode.
Instant On Mode
-
When AC power is applied to power strip, the unit will immediately
turn on sequentially.
Set "
On
" delay to "
0
" to select “
Instant On Mode”
. Set off delay to any
desired delay from 1-15 seconds. The "
Off
" delay setting will determine delay sequence for
both on and off delay. Off delay sequence is engaged by using push button switch.
Receptacle One
Always On Mode
-
When power is applied to power strip, unit will
immediately turn on receptacle number ONE. The number ONE receptacle will always stay on
until power is removed. The remaining three outlets are turned on and off sequentially with
push button switch. Set "
Off
" delay to "
0
" to select "
Receptacle One Always On Mode
”. Set
"
On
" delay rotary switch for desired delay from 1-15 seconds. The "
On
" delay setting will
determine delay sequence for both on and off delay for the three remaining duplex
Receptacles.
Timer Mode
-
Will automatically shut off power sequentially after a designated number of
hours, determined by the on and off delay setting.
Anytime On and Off delay settings are the
same TIMER Mode is engaged.
The on and off delay setting will determine the number of hours
before unit will power down sequentially. For example a one second delay setting equals one
hour until unit will power down. A three second delay setting equals three hours delay until
unit will power down. A nine second delay setting equals nine hours delay until unit powers
down sequentially. In the shop we have our rig set at 4 seconds for on and off delay settings. if
I forget to turn off my amp the RS-4 will do it for me in 4 hours.
Remember to always keep delays settings differant to avoid timer mode.
Double (00) ZERO
The fifth mode. Perhaps the best mode. perfect on stage when lots of
people will be plugging in , Idiott proof, (00) is instant on mode with no delay , when no
sequencing is required or wanted. You just want a power
on when power is applied power
strip.
