16
Assembly - Damper Shaft and Eyelet
RT, RL, Select R:
Install the piston assembly and the
piston nut.
Refer to the
2023 Deluxe (C1) Service Manual
for detailed piston
installation procedures.
Remove the damper assembly from the vise after the piston assembly
has been installed.
RT, RL, Select R:
Proceed to step 12.
Ultimate RCT:
Clamp the damper shaft into a vise with RockShox Vise
Blocks (3-hole) (10 mm slot), just above the damper shaft threads.
Install the seal head onto the damper shaft.
Ultimate RCT:
Install the piston assembly and piston bolt onto the
damper shaft.
Refer to the
2023 Deluxe (C1) Service Manual
for detailed piston
installation procedures.
Note:
When the piston bolt is tightened to the specified torque, the
rebound poker assembly will be sized to the correct postion inside the
damper shaft. This step is critical for proper damper function.
Remove the damper shaft from the vise.
6
RT, RL
12 mm
6.2 N•m (55 in-lb)
Select R
12 mm
6.2 N•m (55 in-lb)
7
RockShox Vise Blocks (3-hole) - 10 mm slot
RockShox Vise Blocks (3-hole) - 10 mm slot
8
Ultimate RCT
12 mm
4.5 N•m (40 in-lb)