![background image](http://html1.mh-extra.com/html/rockshox/deluxe-c1/deluxe-c1_service-manual_1474529032.webp)
32
Disassembly - Damper Shaft, Eyelet, and Reservoir
New eyelet assembly and original eyelet assembly:
Loosen each
rebound adjuster set screw. Do not remove the set screws.
Carefully lift the rebound adjuster ring, and upper rebound adjuster
ring seal, up and off of the eyelet.
Remove the lower rebound adjuster ring seal.
Remove the rebound adjuster detent pin.
Remove the rebound adjuster detent spring. Tap the eyelet lightly on a
flat surface to remove the detent spring.
11
1.5 mm
1.5 mm
12
13
Pliers