10
Seatpost Troubleshooting
S e a t p o s t T r o u b l e s h o o t i n g
The Vent Valve is located on the bottom of the seatpost and can be used after extended use if the seatpost develops a 'squish' suspension feel in
the fully extended position when the rider is seated. If this occurs after extended use, it is an indication that air and oil have mixed and the Vent Valve
should be used. Activating the Vent Valve will channel the air back into the air chamber and out of the oil.
NOTICE
The Vent Valve should be used only if the seatpost compresses more than 5 mm during normal use in the fully extended position while seated. Do
not use the Vent Valve if the seatpost is compressed. The Vent Valve is not to be used regularly and is only to be used if the seatpost compresses
abnormally while seated.
V e n t V a l v e P r o c e d u r e
Secure the bicycle in an upright position.
Press the Reverb AXS controller paddle until the seatpost is fully ex-
tended, then release the paddle.
Remove the saddle from the seatpost.
Tighten the clamp bolt enough to prevent the clamps from moving.
1
2
3
T25