![background image](http://html1.mh-extra.com/html/rockshox/reverb-axs-2020/reverb-axs-2020_service-manual_1474539013.webp)
13
Seatpost Service
S e a t p o s t S e r v i c e
NOTICE
Do not attempt to disassemble the Reverb AXS seatpost or RockShox AXS controller electronics compartment assemblies. Disassembly may cause
permanent damage to electronic components.
S e a t p o s t R e m o v a l
Secure the bicycle in an upright position.
NOTICE
The Reverb seatpost will be removed from the bicycle. Do not clamp
the Reverb seatpost in a bicycle work stand before removal.
Press the RockShox AXS controller paddle and fully extend the
seatpost.
Activate 'Service Mode'
: Press and release the AXS button on the
seatpost
once
to set the seatpost to 'Service Mode'. In 'Service Mode'
the internal valve is open and the seatpost will compress by hand.
To confirm the seatpost has been set to 'Service Mode', push down
and compress the seatpost. The seatpost should compress and extend
freely.
If the seatpost does not compress by hand, press and release the
AXS button on the seatpost once more and reconfirm the seatpost
compresses.
NOTICE
The Reverb AXS seatpost must be set to 'Service Mode' before
disassembly. To avoid damage to the seatpost internal parts, do not
attempt to disassemble the seatpost until 'Service Mode' has been
activated.
If the AXS button is pressed accidentally during use and the internal
valve is opened, press the AXS button once more to close the valve.
The seatpost should not compress unless the AXS button in the
controller is pressed.
1
2
3
Reverb AXS Button