![background image](http://html1.mh-extra.com/html/rockshox/reverb-axs-2020/reverb-axs-2020_service-manual_1474539015.webp)
15
Lower Post Removal
5 0 / 2 0 0 / 6 0 0 H o u r S e r v i c e
L o w e r P o s t R e m o v a l
NOTICE
Use bench vise soft jaw inserts to prevent damage to the seatpost or any seatpost components when clamping it into a vise. Clamp each component
only tight enough to prevent it from spinning or slipping in the soft jaws. Clean the vise soft jaws with isopropyl alcohol and a clean shop towel
before use.
To avoid permanent damage to the electronic components, clamp
only
the flat surfaces
of the circular saddle clamp slot in the seatpost head
(green area).
Remove the saddle clamp bolt and remove the saddle clamps.
Do
not
remove the (A) barrel nut tilt adjuster or the (B) tilt adjuster
screw.
With the electronics compartment positioned outside the edge of
the vise clamps, clamp the seatpost head into a bench vise with flat
aluminum soft jaw vise inserts on the flat saddle clamp slots.
NOTICE
To avoid permanent damage to the electronic components, clamp
only the flat surfaces
of the circular saddle clamp slot in the seatpost
head.
Confirm no part of the vise soft jaws contact the electronics
compartment before proceeding.
Vise Soft Jaw Insert Clamp Area (green)
1
T25
A
B
2