16
Lower Post Removal
Remove the air cap.
Wrap a shop towel around the air valve to absorb any hydraulic fluid
that may escape when the Schrader valve is depressed.
Depress the Schrader valve and release all air pressure from the air
chamber. Wipe any excess fluid with the shop towel.
⚠
WARNING - EYE HAZARD
Keep your face and eyes away from the air valve when deflating the
seatpost. Verify all pressure is removed from the seatpost before
proceeding. Failure to do so can cause the inner seal head and
inner shaft to separate from the seatpost at high velocity during
disassembly. Wear saftey glasses and keep your eyes and face away
from the air valve.
Unthread and remove the baseplate nut.
3
9 mm
4
Pick or small hex wrench
5
22 mm or Adjustable wrench