20
Top Cap and Seal Head Bushing Replacement
2 0 0 H o u r S e r v i c e
To p C a p a n d S e a l H e a d B u s h i n g R e p l a c e m e n t
The following steps are to be completed during the A1 200 hour service interval and include replacing parts included in the
Reverb AXS A1 Service
Kit - 200 hour
. These steps do not require complete disassembly of the upper post assembly.
Remove the foam ring from the inner shaft assembly and discard the
foam ring.
Remove the bottomout o-ring from the inner shaft assembly and
discard the bottomout o-ring.
Spread and remove the seal head bushing and discard the seal head
bushing.
NOTICE
The seal head bushing may have sharp edges. Do not scratch the
inner shaft with the bushing. Scratches will cause leaks.
Remove the seal head o-ring. Pinch the o-ring, lift it from the o-ring
groove, and remove it. Discard the o-ring.
1
2
3
4