![background image](http://html1.mh-extra.com/html/rockshox/reverb-axs-2020/reverb-axs-2020_service-manual_1474539021.webp)
21
Top Cap and Seal Head Bushing Replacement
Remove the top cap assembly from the upper post and discard it.
Clean the upper post and inner shaft assembly.
Apply a liberal amount of grease around the inside of a
new
top cap
assembly and onto the seals.
Install the new top cap assembly, dust wiper seal end first, onto the
upper post assembly over the seal head. Slide the top cap assembly
down until it is positioned below the upper post key slots.
NOTICE
Ensure the dust wiper seal slides over the seal head without folding
the outer lip of the seal.
5
6
7