![background image](http://html1.mh-extra.com/html/rockshox/reverb-axs-2020/reverb-axs-2020_service-manual_1474539027.webp)
27
Inner Shaft Assembly
6 0 0 H o u r S e r v i c e
I n n e r S h a f t A s s e m b l y
NOTICE
Inspect each part for scratches.
Do not scratch any sealing surfaces when
servicing your suspension. Scratches can cause leaks.
When replacing seals and o-rings, use your fingers or a pick to remove the
seal or o-ring. Spray RockShox Suspsension Cleaner or isopropyl alcohol on
each part and clean with a clean lint-free shop towel.
Apply
only
RockShox Dynamic Seal Grease to all Reverb parts, seals, and
o-rings.
Clean the inner shaft/main piston assembly.
Remove the main piston o-ring from the main piston and discard it.
Clean the piston gland.
NOTICE
Do not scratch the inner shaft piston with the pick.
Apply a liberal amount of grease onto the piston and the new piston
o-ring. Carefully install the piston o-ring onto the piston.
NOTICE
The piston may have sharp edges. Use caution and do not damage
the o-ring during installation. If the o-ring is cut or damaged, function
will be compromised.
1
2