![background image](http://html1.mh-extra.com/html/rockshox/reverb-axs-2020/reverb-axs-2020_service-manual_1474539029.webp)
29
Inner Shaft Assembly
Clamp the inner shaft into the RockShox 3-Hole vise block in the
10 mm slot.
Insert the Vent Valve rod into the inner shaft. Press the baseplate down
and into the shaft until the Vent Valve rod upper o-ring snaps into
place.
Thread the inner shaft into the baseplate.
Tighten the baseplate onto the inner shaft to the specified torque.
Remove the inner shaft assembly from the vise and set it aside on a
clean shop towel.
6
7
11 mm
7 N•m (62 in-lb)