![background image](http://html1.mh-extra.com/html/rockshox/reverb-axs-2020/reverb-axs-2020_service-manual_1474539038.webp)
38
Inner Shaft Installation
Remove the seatpost from the vise.
Hold and support the inner shaft assembly with one hand and pour all
remaining fluid from the upper post into an oil pan.
With the electronics compartment positioned outside the edge of
the vise clamps, clamp the seatpost head into a bench vise with flat
aluminum soft jaw vise inserts on the flat saddle clamp slots.
NOTICE
To avoid permanent damage to the electronic components, clamp
only the flat surfaces
of the circular saddle clamp slot in the seatpost
head.
Hold the shaft in place and carefully slide the seal head down the shaft
into the upper post.
Thread the seal head into the upper post by hand until it stops.
NOTICE
Do not push the inner shaft into the upper post.
3
4
5