![background image](http://html1.mh-extra.com/html/rockshox/reverb-axs-2020/reverb-axs-2020_service-manual_1474539041.webp)
41
Brass Keys Installation
5 0 / 2 0 0 / 6 0 0 H o u r S e r v i c e
B r a s s K e y s I n s t a l l a t i o n
NOTICE
Side-to-side movement between the inner and outer posts is an indication
that the brass keys are worn and need to be replaced. Vertical lines on the
key are an indication that the key is worn.
New brass keys must be of the same size and have the same number of
etched lines as the original brass keys for proper function.
Refer to the RockShox Spare Parts Catalog at
www.sram.com/service
for a list of brass key kits available.
Apply a liberal amount of grease onto each key slot and onto the upper
post.
Install the brass keys into the key slots. The orientation of the brass
keys is not critical.
Apply a liberal amount of grease onto the brass keys and upper post.
Slide the top cap up and down to lubricate the top cap seal.
Worn brass key
New brass key
1
2