![background image](http://html1.mh-extra.com/html/rockshox/reverb-axs-2020/reverb-axs-2020_service-manual_1474539042.webp)
42
Brass Keys Installation
Align the lower post key slots with the brass keys and ensure the laser
etched RockShox logo is aligned with the
back
of the seatpost head.
Hold each brass key in place and slide the lower post down until it
engages the keys. Continue to slide the lower post down over the
brass keys.
Slide the top cap up until it contacts the lower post threads. Thread the
top cap onto the lower post by hand.
Tighten the top cap.
NOTICE
Do not scratch the upper post with the wrench. Scratches can allow
contaminants to enter the lower tube, damage the upper post outer
surface, and degrade performance.
3
Key slots
4
34 mm
28 N•m (248 in-lb)