44
Brass Keys Installation
Install the retaining ring into the lower post. Insert the flat end into the
groove first and use your finger to guide the retaining ring around the
end of the lower post. Push the scalloped end of the retaining ring into
the groove until it snaps completely into place.
Remove the seatpost from the vise.
⚠
CAUTION
Confirm the retaining ring is securely in place before continuing.
Failure to properly secure the retaining ring will result in collapse of
the upper post when weight is applied.
Install the baseplate nut onto the baseplate with the wrench flats
oriented outward.
Secure the baseplate in place with an 18 mm wrench and tighten the
baseplate nut to the specified torque.
NOTICE
To avoid damage to the baseplate nut and lower post, do not
over-tighten the baseplate nut.
7
Small flat blade screwdriver
8
22 mm
5 N•m (44 in-lb)
18 mm