![background image](http://html1.mh-extra.com/html/rockshox/reverb-axs-2020/reverb-axs-2020_service-manual_1474539048.webp)
48
Seatpost Installation
S e a t p o s t I n s t a l l a t i o n
5 0 / 2 0 0 / 6 0 0 H o u r S e r v i c e
I n s t a l l a t i o n a n d T e s t F u n c t i o n
Secure the bicycle in an upright position.
Install the seatpost and saddle. Consult the
Reverb AXS User
Manual
at
www.sram.com/service
for seatpost and saddle installation
procedures.
Open the battery latch and remove the battery block.
Remove the battery cover from the SRAM battery.
Install the battery into the seatpost and close the latch.
Press the AXS button to deactivate 'Service Mode'. The internal motor
should activate and close the internal valve.
Push down on the saddle to confirm the internal valve closed
successfully and 'Service Mode' is deactivated. The seatpost should
not compress.
1
2
3