23
Piston Service
Remove the seal head/air piston from the damper shaft.
Remove the seal head/air piston from the damper shaft.
Remove the internal seal o-ring located in the internal seal gland.
Remove the internal seal o-ring located in the internal seal gland.
Install a new internal seal o-ring into the seal gland.
Install a new internal seal o-ring into the seal gland.
Remove the inner o-ring, located at the base of the threads in the seal
Remove the inner o-ring, located at the base of the threads in the seal
head/air piston.
head/air piston.
Install a new inner o-ring into the seal head/air piston.
Install a new inner o-ring into the seal head/air piston.
Push the compression ball out of the backside of the seal head
Push the compression ball out of the backside of the seal head
through the bleed port.
through the bleed port.
Do not replace the compression ball at this time; you will
Do not replace the compression ball at this time; you will
replace it later.
replace it later.
Do not reuse the compression ball.
Do not reuse the compression ball.
8
9
10
11
1.5 mm