35
Air Can Installation
Press the air can onto the damper then thread it onto the shaft eyelet
Press the air can onto the damper then thread it onto the shaft eyelet
and tighten.
and tighten.
Remove the shock from the vise. Clean the shock.
Remove the shock from the vise. Clean the shock.
Install the sag indicator o-ring.
Install the sag indicator o-ring.
Pressurize the shock enough to extend the damper body to the full
Pressurize the shock enough to extend the damper body to the full
length, around 50 PSI / 3.5 bar.
length, around 50 PSI / 3.5 bar.
5
6
7
8