Open the battey cover and install the supplied 2 AAA batteries
and close the battery cover.
Enjoy remote control to bring you the convenience of it.
1
1
2
2
3
2~3cm
1
2
3
3
Press and hold the IR learning button for 3 seconds, then the
LED indicator glow purple that means you have entered the
IR learning mode.
If you want to clear the saved IR values of the IR learning buttons,
press and hold OK button and Delete button at the same time
for 3 seconds.
Installation
♦
LED Indicator of RC01BT
♦
Warranty Info.
♦
Product Info.
♦
Contact Us
♦
FCC Statement
♦
Turn on Bluetooth on your device while holding down the re-
turn key and all app key of RC01BT. The red and blue lights
will flash alternately, then your device can find RC01BT and
can be paired with Bluetooth.
Please keep 2~3 cm distance between the front end of RC01BT
and with the front end of the other remote that you want to
learn. Press the specific button that you want to learn on the
other remote to start the IR learning. The IR learning is com-
pleted when the LED indicator is off.
IR Learning of RC01BT
♦
After RC01BT is connected to the device
successfully, the LED indicator on the
remote will glow red when you press
any button on the remote.
If RC01BT is not connected properly with
the device, the LED
indicator on the re-
mote will flash in blue.
If you are pairing RC01BT with the device, the LED indicator
will flash both red and blue alternately. The LED indicator is
off when Bluetooth pairing is finished.
Please check with your local distributor, agent, or retailer that you
purchased from for the limited product warranty terms of RC01BT
and the accessories.
FCC 15.19 :
THIS DEVICE COMPLIES WITH PART 15 OF THE FCCRULES. OPERATIONS IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS: ( 1 ) THIS DEVICE MAY
NOT CAUSE HARMFUL INTERFERENCE AND ( 2 ) THIS DEVICE MUST ACCEPT
ANY INTERFERENCE RECEIVED, INCLUDING INTERFEERENCE THAT MAY
CAUSE UNDESIRED OPERATION (15.19)
FCC 15.21:
The changes or modific
ati
ons not expressly approved by the party responsi-
ble for compliance could void the user’s authority to operate the equipment.
FCC 15.105:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the inst-
ructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installa
tion. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
RF exposure warning:
Product Name :
Bluetooth Voice Remote
Brand/Model Name :
RockTek/RT-RC01BT
Connection Mode :
Bluetooth
Bluetooth Transmission Distance :
10M
Battery :
AAA x 2
System :
Android
Made in China
Manufacturer :
RockTek Co., Ltd.(Taiwan)
Official Website :
www.RockTek.com.tw
Email Support :
support@rocktek.com.tw
CCAL19LP2680T2
FCC ID:2AFIVRT-RC01BT
This device contains transmitters and receivers which emit Radio Frequency
(RF) energy. The device is designed to comply with the limits for exposure
to RF energy set by the Federal Communications Commission (FCC) of the
United States, Industry Canada (IC) of Canada, and the regulating entities
of other countries.
