Installation Data
Communication Interface Module
Cat. No. 1784-KT2/B
5
2.
Turn on the power switch. The following message appears:
Press [ENTER] to continue.
Press [ENTER].
3.
The main menu appears:
MAIN MENU
1. Learn about the computer
2. Backup the Reference Diskette
3. Set configuration
4. Set features
5. Copy an option diskette
6. Move the computer
7. Test the computer
Use or to select. Press Enter.
Escape=Quit F1=Help
Move the cursor down to the Copy an Option Diskette option and
press [ENTER].
4.
The following message appears:
Remove your backup copy of the Reference
diskette and insert the options diskette into drive
A.
Insert the 1784-KT2 Options and Diagnostics
diskette into drive A and
press [ENTER]. Follow the instructions on your screen.
The above process copies only the 1784-KT2 Adapter Description
file to the current IBM PS/2 Reference diskette. When this copy
procedure is complete, store both diskettes.
Creating a Backup of the PS/2 Computer's Current Configuration
Important: We assume you have prepared your current IBM PS/2
Reference diskette for 1784-KT2 configuration capability. If you have not
yet done so, turn to the section earlier in this document.
To create a backup of the PS/2 computer’s current configuration, follow
the steps below:
1.
Insert the current IBM PS/2 Reference diskette into drive A.
