Installation Data
Communication Interface Module
Cat. No. 1784-KT2/B
9
Total System Memory
Installed Memory..............2048KB (2.0MB)
Useable Memory..............2048KB (2.0MB)
BuiltIn Features
Installed Memory..............2048KB (2.0MB)
Diskette Drive A Type......1.44MB [3.5"]
Diskette Drive B Type.......[Not Installed]
Math Coprocessor.............[Not Installed]
Serial Port..........................[Serial_1]
Parallel Port.......................[Parallel_1]
Slot 1AllenBradley Company 1784KT2
Memory Address...............[0C0000h0C3FFFh]
Interrupt Level....................[IRQ9]
Auxiliary Communication
Port.........................[PLC2/3 Direct Connect]
Esc=Quit F5=Previous F10=Save Home Page up
F1=Help F6=Next End Page Down
Change Configuration
7.
Select a memory address by moving the cursor down to the
1784-KT2 Memory Address option. The 1784-KT2 supports the
following memory addresses (in hexadecimal):
0C0000 - 0C3FFF
0C4000 - 0C7FFF
0C8000 - 0CBFFF
0CC000 - 0CFFFF
0D0000 - 0D3FFF
0D4000 - 0D7FFF
0D8000 - 0DBFFF
0DC000 - 0DFFFF
Use [F5] and [F6] to scroll back and forth through the addresses.
Display your selection on the screen. Make sure you select an
address that is not being used by another adapter card in your PS/2
computer. If you select an address currently in use, an asterisk will
appear next it.
