background image

6

     Industrial Integrated Display Computers

Publication 6181P-IN010C-EN-P - December 2009

Operating System

The computers are shipped with one of these Microsoft-licensed embedded operating 
systems:

Windows XP Professional for Embedded Systems, Service Pack 2b

Windows Embedded Standard 2009

No Windows XP operating system updates have been applied to the factory image beyond 
the service packs. All available Windows Embedded Standard 2009 operating system updates 
have been applied as of September 2009. 

For computers with Windows XP, the I386 source directory for Microsoft Windows is on the 
system drive of your computer off the root directory, C:\I386. This allows for easy removal 
and addition of Windows components.

Computers with rotating hard-disk drives include a recovery partition on the system drive 
containing the original factory image. You can use the supplied Computer System Cloning 
CD to restore the operating system from the recovery partition, create a new recovery image, 
and create bootable external-recovery media. Refer to the Cloning Utility technical data, 
publication 

6000-TD002

, for instructions.

Catalog Number

Model

Series

Display Size

Touchscreen

Package

6181P-17NPXP

1700P

E

17 in.

No

Performance

6181P-17TPXP

Yes

6181P-17TPXPDC

(1)

(1)

Models with a catalog number ending in DC operate from DC power.

6181F-17TPXP

(2)

(2)

Models with a catalog number with a base number ending in F have solid state hard drives.

6181F-17TPWE

(2)

6181F-17TPXPDC

(1)(2)

6181F-17TPWEDC

(1)(2)

6181F-17TPXPSS

(2)

6181F-17TPWESS

(2)

6181P-17TPXPSS

(3)

(3)

Models with a catalog number with a base number ending in SS have a stainless steel bezel.

6181P-17NSXP

No

Standard

6181P-17TSXP

Yes

6181F-17TSXP

(2)

6181F-17TSWE

(2)

Summary of Contents for Allen-Bradley 6181F-12TPWE





























Reviews: