Publication 900-UM007D-EN-E - January 2011
4-58
Parameter Adjustments & Application Considerations
4.
Select the Auto/Manual Select Addition parameter by pressing the
M
key.
Figure 4.116
5.
Use the
U
key to set the parameter to ON.
Figure 4.117
6.
Press the
O
key for at least 1 second to move from the Advanced
Setting function group to the Initial Setting function group.
Figure 4.118
7.
Press the
O
key for at least 1 second to move from the Initial Setting
function group to the Operation function group.
8.
Select the Auto/Manual Switch parameter by pressing the
M
key.
Figure 4.119
9.
Press the
O
key for at least 3 seconds to move from the Operation
function group to the Manual Control function group.
Figure 4.120
a
m
ad
off
Auto/manual
select addition
a
m
ad
on
in-t
5
Input type
a-
m
Auto/manual
switch
C
25
0.0
PV/MV
Summary of Contents for Allen-Bradley 900-TC16
