3
Important User Information
Because of the variety of uses for the products described in this publication,
those responsible for the application and use of this control equipment must
satisfy themselves that all necessary steps have been taken to assure that
each application and use meets all performance and safety requirements,
including any applicable laws, regulations, codes and standards.
The illustrations, charts, sample programs and layout examples shown in
this guide are intended solely for purposes of example. Since there are many
variables and requirements associated with any particular installation,
Rockwell Automation does not assume responsibility or liability (to include
intellectual property liability) for actual use based upon the examples shown
in this publication.
Rockwell Automation publication SGI-1.1,
Safety Guidelines for the
Application, Installation and Maintenance of Solid-State Control
(available
from your local Allen-Bradley sales office), describes some important
differences between solid-state equipment and electromechanical devices
that should be taken into consideration when applying products such as
those described in this publication.
Reproduction of the contents of this copyrighted publication, in whole or
part, without written permission of Rockwell Automation, is prohibited.
Safety Precautions
Safety Signal Words
This manual uses the following signal word to mark safety precautions for the
Bulletin 900-TC8, 900-TC16, and 900-TC32 Temperature/Process
Controllers.
These precautions provide important information for the safe application of
the Temperature/Process Controller. You must make sure to follow the
instructions provided in all safety precautions.:
ATTENTION
!
Identifies information about practices or circumstances
that can lead to personal injury or death, property damage
or economic loss
Summary of Contents for Allen-Bradley 900-TC16
