background image

Publication 440R-IN087A-EN-P - July 2022 | Supersedes Publication 440R-IN061A-MU-P - April 2011

Copyright © 2022 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.

Rockwell Otomasyon Ticaret A.Ş. Kar Plaza İş Merkezi E Blok Kat:6 34752, İçerenköy, İstanbul, Tel: +90 (216) 5698400 EEE Yönetmeliğine Uygundur

Allen-Bradley, expanding human possibility, Guardmaster, Minotaur, and Rockwell Automation are trademarks of Rockwell Automation, Inc.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

Your comments help us serve your documentation needs better. If you have any suggestions on how to improve our content, complete the form at

rok.auto/docfeedback

.

For technical support, visit 

rok.auto/support

.

95302168

10000176979 Ver 01

Waste Electrical and Electronic Equipment (WEEE)

Rockwell Automation maintains current product environmental compliance information on its website at 

rok.auto/pec

.

At the end of life, this equipment should be collected separately from any unsorted municipal waste.

Approximate Dimensions

Figure 6 - Dimensions [mm (in.)]

Safety Specifications

You can use the MSR131RTP safety relay in safety circuits according to 
DIN EN 60204-1/VDE 0113 part 1. Safety requirements that are specified in 

Specifications on page 1

 are maximum, based on the operation mode and wiring.

Specifications are applicable only if the safety function is demanded at least once 
within 6 months. All diagnostic tests are conducted at least before next demand. 
The mission time (TM) for the proof test interval (PTI) is adopted. Components 
failure rates according to SN29500.

Figure 7 - Safety Circuit

Declaration of Conformity

CE Conformity

Rockwell Automation declares that the products that are shown in this document 
conform with the Essential Health and Safety Requirements (EHSRs) of the 
European Machinery Directive (2006/42/EC) and EMC Directive 2014/30/EU.

For a comprehensive CE certificate visit: 

rok.auto/certifications

.

UKCA Conformity

Rockwell Automation declares that the products that are shown in this document 
are in compliance with the Supply of Machinery (Safety) Regulations (2008 No. 1597) 
and Electromagnetic Compatibility Regulations (2016 No. 1091).

For a comprehensive UKCA certificate visit: 

rok.auto/certifications

.

(a)

(a)

Example

Channel 1

Channel 2

Sensor 

Contact

Sensor 

Contact

E-stop 800F 

(a)

Actuator 1

Actuator 2

Safety Relay 440R

Contactor 100S 

(a)

Reviews: