26
Rockwell Automation Publication 6200-UM001C-EN-P - July 2018
Chapter 3
Install the Thin Client or Computer
VESA Mounting
You can use an optional bench/tabletop adapter to mount a VersaView 5000
thin client or industrial computer on a bench or tabletop.
For installation instructions, see
Install the VESA Mounting Plate on page 54
.
Mount a Non-display Model
Follow these steps to mount a VersaView 5000 non-display model.
1. Verify that the power is disconnected.
2. Depending on your application, drill holes to accommodate customer-
supplied M5 pan head screws.
for mounting hole locations and dimensions.
3. Mount the non-display model by using four customer-supplied M5 pan
head screws.
Tighten to a torque that is appropriate for the screw and material.
IMPORTANT
If you choose to VESA mount an integrated display model, its IP rating is
reduced from IP65 to IP20.
IMPORTANT
Depending on the bracket, certain restrictions apply when you mount a
non-display model. See
for details.
For other available non-display mounting brackets and their orientations,
see
