Rockwell Automation Publication 6200-UM001C-EN-P - July 2018
33
Chapter
4
Operate the Thin Client or Computer
Operating Guidelines
Follow these operating guidelines for your VersaView® thin client or computer:
• When the thin client or computer is panel mounted, operator access is
limited to the front of the thin client or computer, which includes the
display and the touch screen.
• When the thin client or computer is mounted in an enclosure, keep the
enclosure door closed during operation so dust and other airborne
contamination do not infiltrate the thin client or computer. Open the
door only for routine maintenance.
• Always use the proper power down procedures as required by your
operating system, such as the Shut Down command in the Microsoft
Windows operating system (OS).
• After you shut down the thin client or computer, do not apply power
again until shutdown is complete.
Topic
Page
Start the Thin Client or Computer
Restart the Thin Client or Computer
Shut Down the Thin Client or Computer
IMPORTANT
Access to components behind the panel where the thin client or
computer is installed is restricted to authorized and properly
trained personnel.
SHOCK HAZARD:
Do not operate the thin client or computer with
the covers removed. An electric shock hazard exists. All covers are
required to maintain EMI shield.